Goodbye Glasses! Introducing Smartphone Screens that will Correct Your Vision
[vc_row][vc_column][vc_column_text]Westbrook Stevens, LLC supports these cutting edge businesses. Look at what is coming and investigate their “Disruptive Technologies.” Go to each of these website links to learn more about these products and teaming opportunities. As you contact them… tell Corey that Craig at Westbrook Stevens sent you.
[/vc_column_text][vc_single_image image=”5153″ img_size=”large”][/vc_column][vc_column width=”1/2″][vc_column_text]Titan Brick offers a new concept in building where raw materials are abundant almost everywhere and the process of making the bricks require less energy than any other type of building material.
This technology produces high quality composite wood materials by incorporating the use of novel adhesives into the manufacturing processes. This innovation improves wood adhesive composition for various wood composite products, including: oriented strand board (OSB), particleboard, and fiberboard. Our technology reinforces non-continuous glue, with the capability for formaldehyde free adhesive formulation. The result is a low cost, lighter wood panel board that can be competitively marketed alongside high quality products, currently sold at a higher price.
Researchers at the University of California, Davis, have developed a novel method for dramatically increasing the rate of muscle growth.
[/vc_column_text][/vc_column][/vc_row]
To learn more about how Westbrook Stevens, LLC might support your organization contact us.[/vc_column_text][vc_separator][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]
A NEW DISRUPTIVE GREEN BUILDING TECHNOLOGY.
[/vc_column_text][vc_single_image image=”5153″ img_size=”large”][/vc_column][vc_column width=”1/2″][vc_column_text]Titan Brick offers a new concept in building where raw materials are abundant almost everywhere and the process of making the bricks require less energy than any other type of building material.
This alone would make our bricks stand out among other building materials but the list of advantages goes much further.
Features of Titan Bricks:
- Hurricane and tornado resistant (sustained winds up to 240 mph)
- Mold and mildew resistant
- May not sustain structural damage from flood waters
- Fire resistant up to 1,800 degrees
- Two and one half times stronger than concrete blocks
- Bricks resist termite damage
- Insulated with a huge thermal mass and an R-20 heat resistant coating
This technology produces high quality composite wood materials by incorporating the use of novel adhesives into the manufacturing processes. This innovation improves wood adhesive composition for various wood composite products, including: oriented strand board (OSB), particleboard, and fiberboard. Our technology reinforces non-continuous glue, with the capability for formaldehyde free adhesive formulation. The result is a low cost, lighter wood panel board that can be competitively marketed alongside high quality products, currently sold at a higher price.
BENEFITS
[/vc_column_text][vc_btn title=”Go To Website” style=”flat” color=”blue” link=”url:http%3A%2F%2Fnanoadhesivetech.com%2F||”][vc_separator border_width=”10″][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text][/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]A solution which allows people to view their devices without having to wear glasses, contacts, or receive extensive surgeries. Our proprietary technology can be retrofitted to your current electronic devices to help you read emails, view videos or search the web without the annoying and expensive headgear! This technology is a combination of a simple pinhole mask layer on standard screens along with our proprietary software. This software alteration in the display content will allow the individual to see the image in sharp focus without wearing corrective eyewear.
[/vc_column_text][vc_btn title=”Go to Website” style=”flat” color=”blue” link=”url:http%3A%2F%2F2020display.com%2F||”][/vc_column][/vc_row][vc_row][vc_column][vc_separator border_width=”10″][vc_single_image image=”5175″ img_size=”large”][vc_column_text]
PLASMA ACTUATOR TECHNOLOGY
Dynamic Blade Technologies has licensed a technology developed at a major university by 9 PhD’s and PhD students. This patented and patent-pending plasma actuator increases the effective plasma force by reducing the shear stress on the surface of the blade in the proximity of a plasma actuator.
Benefits
- Reduces aerodynamic eddies and decreases drag, increasing electricity extraction
- Replaces moving mechanical components (such as vortex generators), eliminating weight and lowering the need for maintenance
- Exhibits reduced shear stress compared to available flow control devices, possibly increasing actuator life
- The actuators are fully electronic, with no moving parts, and can withstand high force loadings and have the potential to reduce noise
- They can be laminated into the turbine blade surface (no slots or cavities required)
- Actuators can be operated in both steady and unsteady modes
- Actuators have high bandwidth so they have fast response for feedback control
- Low power consumption (Approximately $3 a day per wind turbine)
Researchers at the University of California, Davis, have developed a novel method for dramatically increasing the rate of muscle growth.
They were able to achieve an 80% increase in muscle gains from resistance training (actual University test results).
They accomplished this by suppressing a known molecule (within muscles).
In addition, the researchers feel that by removing this “molecular brake”; Athletes and fitness enthusiasts around the world will also enjoy the following benefits.
The unique ability to increase muscle while also:
- Lose body fat or “cut up” (fitness experts know it’s very hard to pack on muscle while eating less or dieting).
- Endurance train or do frequent cardio workouts (it’s typically hard to build muscle while burning calories).
Researchers at a major university in the United States have dramatically improved a plants nitrogen absorption by regulating amino acid sensors. They were able to alter the plant, resulting in a major increase in plant size, and it is not considered genetic modification by the government.
Production and productivity improvements in agriculture and forestry are crucial to meet the global demand for food, fuel and industrial uses. Threats posed by the effects of deleterious climate change such as water deficiency, biotic and abiotic stress need to be effectively addressed. One of the primary methods of increasing yield is the efficient application of nitrogen. Testing has resulted in an almost 300% biomass increase and over a 60% increase in root length. This technology could be used in a diverse number of crop plants.[/vc_column_text][vc_btn title=”Go to Website” style=”flat” color=”blue” link=”url:http%3A%2F%2Fnewcropscience.com%2Ftechnology%2F||”][vc_separator border_width=”10″][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”5184″ img_size=”large” title=”Titanium Laser Tech, Inc.”][vc_btn title=”Go To Website” style=”flat” color=”blue” link=”url:http%3A%2F%2Ftitaniumlaser.com%2F||”][/vc_column][vc_column width=”1/2″][vc_column_text]
Producing titanium parts efficiently requires a delicate balance between productivity and profitability. However, in standard machining practices these two factors share an inverse relationship, meaning greater productivity can come at a higher cost due to rapid tool degradation, while the desire to increase profit margins by extending tool life may result in decreased metal-removal rates and extended cycle times. Overcoming this issue requires a new approach in which all components of the machining process are developed and integrated specific to the material’s unique challenges.
Our patented technology (s) uses an active flow control system utilizing plasma actuators has been developed at the University of Notre Dame. This system is capable of generating a body force which controls flow separation from a vehicle. By controlling flow separation, the drag force on a vehicle is minimized. In essence, a vehicle can be streamlined independent of its actual shape. Physical devices such as spoilers, bobtails, flow plates, and diverter tabs have been used to move the airflow in a desired direction. Plasma actuators ionize the local airflow to induce a similar affect without the added structural components or weight. Even the best designed physical devices attempt to divert flow, unlike plasmas which modify the existing flow field.
Advantages:
- Being able to reduce fuel costs can add directly to a company’s bottom line. With less drag affecting a vehicle, fuel efficiency will be improved. With this technology fully developed on a vehicle, less horsepower will be required under the same trip conditions.
- Small form factor (mm) allows the device to be placed at any desired location and can be combined with other passive devices.
- Fully electronic with no moving parts
- Having a fast time response for unsteady applications, having a very low mass which is especially important in applications with high g-loads being able to apply the actuators onto surfaces without the addition of cavities or holes
- Same technology can be used in adding drag to vehicles for road stability on a needed basis With diverted air flow there can be signicant improvement to vehicle acoustics
[/vc_column_text][/vc_column][/vc_row]